Dash Cam Cable Kit,Micro USB 12V-24V to 5V Step-Down Hard Micro USB Cable with LED Display,Support 24 Hours Monitoring,Camera Power Cable

The micro USB cable kit connects to the car power supply and stabilizes the voltage from DC12 - 30V to 5V/3a, providing 24-hour continuous power. LED digital display monitors voltage in real time.Adjustable Switch: The Micro USB dashcam hard wiring kit has a low voltage protection mechanism. The tachograph micro - USB step-down cable has 12V and 24V protection regulation modes. The 12V vehicle voltage protection is set to 12.4-11.6v and the 24V vehicle voltage protection is set to 24.4-23.6v. When the voltage is lower than the cut-off voltage, the wired kit will automatically cut off the power after 5 seconds to prevent the power from running out.24-hour monitoring: The hardline micro USB dashcam kit connects to the beats power supply to maintain dashcam and GPS power even after engine shutdown (make sure dashcam supports parking mode). Micro USB cable kit provides 24-hour uninterrupted power and real-time monitoring of car condition.ACC mode: tachograph wiring kit supports ACC detection, yellow and red cables are connected to ACC fuse slot, corresponding to ignition switch, black grounding cable is connected to body. The wiring of this function is slightly different from the round-the-clock monitoring mode.Micro USB power cable with hidden cable that can be installed permanently, connected to the car fuse box and connected to the power; Suitable for car recorder, GPS navigator, mobile phone charging, DVR, radar detector and other Micro USB port devices ...